Base Shield V1.3 for Grove Arduino Compatible Shield by Seeeduino


Base Shield V1.3 for Grove Arduino Compatible Shield by Seeeduino
Stock Number: 30444 MP
  Be the first to review this item
$9.90


This item is NO LONGER available. Please use our SEARCH feature and see if you can find an alternate item for what you were looking for.
This item is no longer available


SHARE
    
     Email this to a friend     

Detailed Description

Arduino Grove Break-out Board
The Base shield board simplifies connection in the Grove environment. Arduino pins are brought to 4 Pin JST sockets. Each JST provides 2 Signal Pins, A Ground Pin & a =Vcc. You have 4 available I2C connectors, 4 Analog connectors, 7 Digital connectors and 1 UART connector.
The UART connector comprises Arduino’s Digital0 & Digital1 while D2 -D8 Port duplicates ports in a staggered manner: D2=Digital2 & Digital3/D3= Digital3 & Digital4/.../D8=Digital8 & Digital9. The Analog Pins are treated the same A0=Analog 0 & Analog`1/ A1=Analog1 & Analog2 etc. The SPI Header is feed through only as there are no Grove modules that use it. Standardized and stackable shield board compatible with the Arduino I/O Pins.
L: 2-11/16” W: 5/8” WT: .1


California Proposition 65 Warning WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
(This item was manufactured prior to August 31st, 2018)